NDZ Reduced Power Guide Rod Kit GEN 1-3 for Glock 19 23 32 38

Fits Glock Gen 1-3 Models: G19, G23, G32, & G38.

Does Not Fit: Gen 4 or 5 Models.

The NDZ Reduced Power Recoil (RPR) Guide Rod Kit provides fine-tuning and a decisive advantage for all Glock owners. Special features include a rigid stainless-steel guide rod body that improves lock up by completely removing "guide rod flex", and a hex screw removable tip that allows the user to choose various spring weights to calibrate with the ammo they are using. This kit includes a tunable guide rod, 2 ISMI recoil springs, and a Allen wrench to be able to assemble the guide rod and tune its performance. NDZ Performance makes all of its products with pride right here in the USA to the highest quality standards with a lifetime warranty against manufactured defects. Upgrade your Glock's guide rod with an RPR Kit from NDZ Performance today!

Included in this Kit:

• 1 - Stainless Steel Guide Rod with hardware.
• 1 - 3/32" Allen Wrench.
• 1 - 13 lb. ISMI Reduced Recoil Spring.
• 1 - 15 lb. ISMI Reduced Recoil Spring.

Note: Please make sure you are using the correct loads for the springs or you will have cycling issues.

Important: We recommend the use of Blue Loctite on the hex screw threads when switching out springs. This will provide a firm hold and still allow easy removal when necessary.

Glock Factory Recoil Spring Weights by Model:

• Glock Models: G17, G20, G21, G22, G24, G31, G34, G35, G37, G40, G41 - Factory Stock Spring weight is 17 lbs.
• Glock Models: G19, G19X, G23, G32, G38 - Factory Stock Spring weight is 18 lbs.

What Recoil Spring Weight do you Need?

• 11 - 13 lbs. Springs: Typically used for Competition Shooting, or when using a Recoil Compensator with Barrel. A lighter weight Recoil spring allows for a faster recoil time. This allows the shooter to stay on target longer and makes target re-acquisition, Faster and Easier.
• 16 lbs. Springs: For Reduced Power Ammunition Loads.
• 17 - 18 lbs. Springs: Factory Weight.
• 19 - 24 lbs. Springs: For Heavy Power Ammunition Loads +p or +p+.

See our complete line of Glock Gen 1-4 Products here

Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm.

ISMI premium springs are manufactured exclusively with certified aerospace specification alloys; stainless or chrome silicon. Then the springs are heat treated, shot-peened and stress relieved after winding to enhance performance and durability.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.