Ghost 3.5 Ultimate Trigger Connector and Competition Spring Kit

Designed to fit Glock Gen 1-4 Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G29, G30, G31, G32, G33, G34, G36, G37, G38, G39.


The Ultimate in Drop-in 3.5 lb trigger connectors. The Ultimate incorporates the patent pending debris channels which removes debris From the trigger mechanism and reduces the friction of the trigger parts making the Ultimate smooth and self cleaning. Why is self cleaning so important ecause as you fire your pistol debris builds up on the trigger mechanism surfaces. This debris causes additional friction. This friction increases the weight of the trigger pull thus increasing the force applied to the connector.

As the trigger pull weight increases the connector is pushed towards the rear of the trigger housing eventually far enough that the pistol will not fire! The channels also reduce the thickness of the connector body by 33%. This reduction increases reset speed and because these channels are located on the center line of the connector body they do not cause connector torsion. These features along with polishing gives you the Ultimate in light smooth 3.5 lb trigger pulls. - Ghost Inc.


Ghost Competition Trigger Spring Kit

This is a great drop in trigger kit is designed to help you fine tune and improve your trigger pull, and function in competition pistols.

Included in the kit:

• 3 Drop in Springs
• 4lb Reduced Power Striker Spring
• Reduced Power Safety Block Plunger Spring
• 6lb Extra Power Trigger Spring (Extra power reduces the pull weight)

The Ghost Drop in Spring Kits give your Glock a smooth, crisp, lightened Trigger pull that helps promote consistent, match-grade accuracy. You can change specific springs to improve a particular aspect of the trigger pull, or do a complete upgrade.

Accurately calibrated spring weights deliver consistent force through the entire compression and release cycle to give you a light, refined trigger pull without sacrificing the reliability of your pistol s Safe Action system. Trigger Spring has nearly 30% more power than factory spring, which actually reduces pull by as much as 1 lb. for improved control. This produces faster trigger reset for quicker follow up shots. Reduced power Safety Spring reduces friction caused by the firing pin safety, further smoothing the pull. Striker Spring is designed for improved consistency and durability over factory spring.

NDZ Performance has teamed up with Ghost to bring you some of the finest Aftermarket Gun Springs available today. We have several springs kits and individual springs to meet all your needs.

Easily tune your Glock pistol With as low as 2-2.5lbs Trigger pull with the use of any 3.5lb Trigger Connector on the market.

Warning: This kit is for competition use only - not for duty use.

Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm.