Wolff Complete Spring Kit for Glock GEN 1-4

Warning: This kit is for competition use only - not for duty use

Fits Glock Gen 1-4 Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G29, G30, G31, G32, G33, G34, G36, G37, G38, G39, G41.

NDZ Performance has teamed up with W.C. Wolff Gun Springs to bring you some of the finest Aftermarket Gun Springs available today. Wolff has been making Gun springs for over 60 years, these springs are awesome you will not be disappointed in their performance. Whether for Competition or Self Defense Pistols you can't go wrong with the reliability of Wolff Springs.

This Wolff complete spring kit comes with the necessary springs for finely tuning your Glock to the desired setup. The Wolff 4lb Reduced Power Striker Spring along with the Extra Power Trigger Spring and Reduced Plunger allows you to fine tune and improve your trigger pull, and function in competition pistols. Where as the 6lb Extra Power Striker Spring give your Glock increased power, improved consistency and durability as well as a stronger primer hit / striker. The 6lb Extra Power Striker spring is also ideal for 10/45 models due to the heavier firing pin. Accurately calibrated spring weights deliver consistent force through the entire compression and release cycle to give you a light, refined trigger pull without sacrificing the reliability of your pistol s Safe Action system. The trigger Spring has nearly 30% more power than factory spring, which actually reduces pull by as much as 1 lb. for improved control. This produces faster trigger reset for quicker follow up shots.

Included in the kit are 4 Drop in Springs:

• Reduced Power Safety Block Plunger Spring
• 6lb Extra Power Trigger Spring (Extra power reduces the pull weight)
• 4lb Reduced Power Striker Spring (Competition Spring: coupled with a 3.5 lb Trigger Connector will give you an approximate trigger pull weight of 3.0 lbs)
• 6lb Extra Power Striker Spring (Self Defense Spring: coupled with a 3.5 lb Trigger Connector will give you an approximate trigger pull weight of 4.0 lbs)

See our complete line of Glock Gen 1-4 Products here

Wolff Gun Springs has been the leading spring manufacturer in the firearm industry and offers an array of spring powers from reduced, stock to extra power allowing a user to fine tune their setup. Due to varying firearm tolerances as well as to more accurately achieve better results Wolff Gun Springs offers multiple spring weights assuring that a user can achieve the results requested.

W. C. WOLFF COMPANY GUARANTEES THAT ITS PRODUCTS ARE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP. IN THE EVENT OF ANY DEFECTS IN MATERIAL OR WORKMANSHIP, W. C. WOLFF COMPANY S SOLE LIABILITY THEREFOR SHALL BE THE REPLACEMENT OF ANY SUCH PRODUCT(S) THAT ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. THE REPLACEMENT OF ANY SUCH PRODUCT(S) SHALL BE W. C. WOLFF COMPANY S SOLE RESPONSIBILITY. THIS WARRANTY SPECIFICALLY EXCLUDES ANY AND ALL CONSEQUENTIAL OR ACCIDENTAL DAMAGES. NO OTHER WARRANTIES OR LIABILITY WHATSOEVER, ARE EITHER EXPRESSED OR IMPLIED. IF ANY SUCH WARRANTIES SHALL BE IMPOSED BY LAW NOTWITHSTANDING THIS PROVISION, THEN SUCH WARRANTIES SHALL BE THE RESPONSIBILITY OF W. C. WOLFF COMPANY S IMMEDIATE BUYER. BY WAY OF EXAMPLE, AND NOT LIMITATION, THERE SHALL BE NO WARRANTIES OF MERCHANTABILITY, USE IN TRADE, OR FITNESS FOR A PARTICULAR PURPOSE. W.C. WOLFF COMPANY SHALL HAVE NO LIABILIT FOR LOSS OF USE, REVENUE OR PROFIT.

Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.