Ghost Armorer's Half Rear Slide Cover Plate for Glock GEN 1-5 Clear
Designed to fit Glock Gen 1-5 Models: G17, G17L, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G30, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G45, G47.
The Ghost Armorer’s Clear Half Plate is an armorers’ aid for precise tuning and gunsmithing on Glock Gen 1–5 models. Machined slightly thicker than the factory plate and with a clear finish so you can clearly see sear and firing-pin engagement while working on your pistol; giving you control and repeatability when fitting connectors and adjusting the Trigger Control Tab (TCT). Find the best components to repair or upgrade your Glock at NDZ Performance.
Features:
- Clear material for visual inspection during tuning
- Thicker than OEM, intentionally shifts firing-pin leg forward to expand tuning range
- Sectioned 1/3" height, view engagement without removing the slide cover completely
- Bench use only, intended for armorers and competent techs during setup and tuning
- Ideal for use with connectors such as Pro, Evo Elite, Rocket, Tactical, and other aftermarket Ghost parts.
For additional install information or review we always recommend Ghost Inc and their resources. Ghost Installation Information.
See our complete line of Glock Products here
NDZ Performance is a High Volume Authorized Ghost Dealer!
All Ghost Inc products feature a Lifetime Warranty direct from Ghost Inc which covers product(s) against manufacturer defects, user installation and use of the product(s). Ghost Unconditional Lifetime Warranty & Exchange Information.
Disclaimer: "GLOCK" is a federally registered trademark of Glock, Inc. or Glock Ges.m.b.H. NDZ Performance has NO affiliation in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of the word "GLOCK " on this page is merely to identify which firearm these parts or components are compatible with.
Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm.
Manufacturer Sku: GHO-GAP-CLR
Type: Armorer's Half Rear Slide Cover Plate
Model: Clear
Country/Region Of Manufacture: Made in China
Color: Clear
For Gun Make: Glock
For Gun Generation: Gen 1-5
For Gun Model: G17, G17L, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G30, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G45, G47
| Gun Make | Glock |
|---|---|
| Product Type | Rear Plate |
| Product Model | Armorers Plate |
| Product Material | Polymer |
| Product Color | Clear |
| Gun Generation | Gen 1 |
| Gun Generation | Gen 2 |
| Gun Generation | Gen 3 |
| Gun Generation | Gen 4 |
| Gun Generation | Gen 5 |
| Gun Model | G17 |
| Gun Model | G17L |
| Gun Model | G18 |
| Gun Model | G19 |
| Gun Model | G19X |
| Gun Model | G29 |
| Gun Model | G29SF |
| Gun Model | G20 |
| Gun Model | G20SF |
| Gun Model | G21 |
| Gun Model | G21SF |
| Gun Model | G22 |
| Gun Model | G23 |
| Gun Model | G24 |
| Gun Model | G25 |
| Gun Model | G26 |
| Gun Model | G27 |
| Gun Model | G28 |
| Gun Model | G30 |
| Gun Model | G30S |
| Gun Model | G30SF |
| Gun Model | G31 |
| Gun Model | G32 |
| Gun Model | G33 |
| Gun Model | G34 |
| Gun Model | G35 |
| Gun Model | G36 |
| Gun Model | G37 |
| Gun Model | G38 |
| Gun Model | G39 |
| Gun Model | G40 |
| Gun Model | G41 |
| Gun Model | G44 |
| Gun Model | G45 |
| Gun Model | G47 |
13 Reviews Hide Reviews Show Reviews
-
These are great!
I use these on every Polymer80 build to verify proper sear engagement and connector operation. Unlike the orange half-plates, these are clear and allow light in, thereby improving visibility. Super solution.
-
Half Rear Slide Cover Plate Clear
Works as expected. I find these to be better than the orange cover plates.
-
Parts/ shipping
part was literally in the mailbox before I remembered to even check if it had shipped...less than a week
-
good product
It makes working on the glock much easier and faster
